Introduction

TF-Luna is a single-point ranging solid state Lidar, based on ToF principle. With unique optical and electrical design, it can achieve stable, accurate and highly sensitive range measurement.

Small Size Design

Small Size: 35mm*21.25mm*13.5mm
Light Weight: 5g
Low Power: ≤0.35W

High Performance & Economical

This is a close-range, low-cost ToF single-point solid-state lidar with a range of 0.2m–8m. This solid-state lidar has high stability, high sensitivity, and high precision.

Detection distance

TF-Luna solid-state lidar's detection distance is up to 8m, the blind zone is 0.2m, and distance resolution is 1cm.

Minimum edge length of 3.5 cm within a detection distance of 1m;

Minimum edge length of 28 cm within a detection distance of 8m;

Easy to get start, high level of generality

The power supply voltage of TF-Luna lidar distance sensor is 5V, equipped with UART communication interface, the communication level is 3.3V. TF-Luna is compatible with Arduino, Raspberry Pi and other platforms.

Wide Application Scenarios

Robot: Robot obstacle avoidance, Robot anti-drop protection
UAV: UAV obstacle avoidance, UAV altitude setting
Smart City: Smart toilets, Smart trash bins
Smart Retail: Smart ad trigger, Smart mirror

TF-Luna is an economical solid-state lidar that is low-cost and can be widely applied to many development scenarios.

Specification

Distance Resolution: 1cm
Frequency: 100Hz
Ambient Light Resistance: 70klux
Detecting Range: 0.2~8m
Weight: ＜5g
FoV: 2°
Supply Voltage: 5V±0.1V
Data Interface: UART/ I²C
Accuracy: ±6cm@(0.2m-3m)

Documents

Shipping List

TF-Luna LiDAR (8m) x1
Wiring x1

Specification
Accuracy	±6cm@(0.2m-3m)
Cable Lenght	15cm
Connector	Gravity
Output	UART/ I2C
Refresh rate	100Hz
Resolution	±1cm
Power	5V±0.1V
Range Output	0.2~8m